Storage Building - HVAC

Description

MECHANICAL NOTES & SPECIFICATIONS MECHANICAL SYMBOL LEGEND GENERAL THE MECHANICAL PLAN SHALL COMPLY WITH INDICATED BUILDING CODES, ENERGY CODES, AND OTHER LOCALLY ADOPTED STANDARDS. DUCTWORK 1.2. THESE DRAWINGS WILL NOT BE UPDATED FOR FIELD CHANGES NOT PREVIOUSLY DISCUSSED WITH ENGINEER AND LETTERS TO PASS INSPECTION AS A RESULT OF SUCH DEVIATIONS WILL NOT BE PROVIDED. THESE DRAWINGS REPRESENT THE ENGINEER'S INTERPRETATION OF THE APPLICABLE CODES, HAVE BEEN REVIEWED BY THE LOCAL AHJ FOR CODE CONFORMANCE, AND ARE CONSIDERED CONTRACT DOCUMENTS. 1.3. THESE DRAWINGS ARE INTENDED TO INDICATE CAPACITY, SIZE, LOCATION, DIRECTION AND GENERAL ARRANGEMENT, BUT NOT EXACT DETAILS OF CONSTRUCTION. THE FACT THAT ONLY CERTAIN FEATURES OF THE INSTALLATION ARE INDICATED MUST NOT BE TAKEN TO MEAN THAT OTHER SIMILAR OR DIFFERENT FEATURES WILL NOT BE REQUIRED. 1.4. THIS CONTRACTOR SHALL COORDINATE WITH THE OTHER CONTRACTORS TO INSURE THAT EACH TRADE SHALL HAVE SUFFICIENT SPACE TO INSTALL THEIR EQUIPMENT (DUCTWORK, PIPING, ELECTRICAL WORK, ETC.). 1.5. WORK SHALL INCLUDE ALL LABOR, MATERIALS, PERMITS AND OTHER COSTS AS ARE NECESSARY FOR THE INSTALLATION OF A COMPLETE AND SATISFACTORY OPERATIONAL PLUMBING SYSTEM. 1.6. ALL EQUIPMENT FIXTURES, ETC. SHALL BE TESTED, ADJUSTED AND OPERATED AS INDICATED ON THE PLANS AND PLACED IN SATISFACTORY OPERATIONAL CONDITION BY THE CONTRACTOR. THIS CONTRACTOR SHALL GUARANTEE ALL WORKMANSHIP. MATERIALS AND EQUIPMENT TO BE FREE OF DEFECTS FOR A PERIOD OF ONE YEAR FROM DATE OF CERTIFICATE OF OCCUPANCY. THIS IS IN ADDITION TO ANY WARRANTY OR GUARANTEE FROM THE EQUIPMENT MANUFACTURER. FURNISH THE OWNER WITH THE MANUFACTURER'S WRITTEN CERTIFICATES. 1.7. 24"x12" SQ. DUCT SIZE (WIDTH X HEIGHT) 18"Ø ROUND DUCT SIZE (DIAMETER) (E) EXISTING DUCT TO REMAIN SUPPLY AIR O/A OUTDOOR AIR R/A RETURN AIR T/A TRANSFER AIR E/A GENERAL EXHAUST AIR KED GENERAL EXHAUST AIR 1.9. IN GENERAL, ALL DUCTWORK AND CONTROL WIRING SHALL BE RUN CONCEALED IN CEILING AND PIPE SPACES PROVIDED UNLESS NOTED OTHERWISE. RECT. EXHAUST DUCT RISE/DROP ROUND EXHAUST DUCT RISE/DROP 1.10. VERIFY ALL DIMENSIONS FORM ARCHITECTURAL PLANS FOR FIELD DIMENSIONS. DO NOT SCALE CONSTRUCTION DOCUMENTS. 1.11. BURIED PIPING NEAR FOUNDATIONS OR BEARING WALLS SHALL BE INSTALLED AND SHALL BE SLEEVED. 1.18. 1.19. 2. 2.1. 3. 3.1. 4. ALL CONDENSING UNITS INSTALLED ON-GRADE SHALL BE INSTALLED ON CONCRETE HOUSEKEEPING PAD.