Pyne Road Park Camp Ground RFP

Description

Pyne Road Park – Electrical RFP At the main front entrance/gate, install a new 200 amp permanent electrical service (meter/disconnect/panel) (4” galvanized metal poles with caps & galvanized metal unistrut) near the existing pole mounted meter base. From this new 200 amp permanent electrical service, install a 20 amp circuit to the main front gate terminating in a waterproof box for future gate connection, a 20 amp circuit to the main front entrance sign terminating at two (2) new LED sign lights (+1 @ each side of the sign), a 20 amp circuit to the septic tank dumping station terminating in a waterproof box for future pump connection, and a 20 amp circuit to the first gate on the left side of the main entrance driveway/road (campsite exit spot) terminating in a waterproof box for future gate connection. At the campsite entrance/gate area, install a new 200 amp permanent electrical service (meter/disconnect/panel) (4” galvanized metal poles with caps & galvanized metal unistrut) near the back corner of the tool shed next to the old trailer. From this new 200 amp permanent electrical service, install a 20 amp circuit to the campsite entrance gate terminating in a waterproof box for future gate connection. At the campsite area, install all new electrical wiring to new distribution panels (same as existing), then install new electrical wiring to all twenty-four (24) existing campsites terminating at new pedestal service panels (same as existing) containing a main disconnect , 1-50 amp; 1-30 amp; and 1- 20 amp breaker with corresponding plugs and GFIC duplex receptacle. Install an additional electrical circuit between campsite #8 and campsite #10 terminating in a waterproof box for future dock connection. All circuits terminating in a waterproof box for future connection shall be installed on concrete pads including additional exiting PVC conduits for the future connection. All underground wiring shall be installed in PVC conduit at 24”-36” deep below grade with marking tape installed at 18” deep below grade. Any trenching across asphalt driveways/roads shall be repaired with 4” concrete packing over compacted fill and/or gravel base. Boring under driveways/roads is preferred. All land disturbance shall be repaired (compacted, smooth graded, seed, hay) to the original condition and all campsites shall be repaired to the original condition.