Public Works Overhead Doors Addendum

Description

Department of Public Works Invitation to Bid Overhead Garage Door Replacement Litchfield, Connecticut The Town of Litchfield is accepting bids for Replacing Overhead Doors at the Public Works Facility. All bids must be submitted on forms and in accordance with specifications supplied by the Town of Litchfield, Public Works Department. Bids will be received at the Public Works Department, 101 Russell Street, Litchfield, CT, 06759 until June 20, 2024 at 9:00 a.m., and will be opened and read publicly at that time in said office. The bid can be downloaded from the Town of Litchfield web site: www.townoflitchfield.org. There is a mandatory bid walk on June 6, 2024 at 8:00 a.m. at the Public Works Department. Addendum Technical Specifications The Public Works Department is looking for a contractor to install nine (9) overhead garage doors and one alternate. The Doors being bid are numbered: #1,2,3,4,15,20,21,22,23 and #17 as the alternate All doors are to be installed using manufacturer specifications. One (1) door (#15) is 16’-2” wide x 11’-6” high Full view sash, styles, and rails to be insulated with polyurethane insulation consisting of five panels across. Four (4) doors (#20-23) are 14’-2” wide x 12’-1” high Full view sash, styles, and rails to be insulated with polyurethane insulation consisting of four panels across. Four (4) doors (#1-4) are 12’-0” wide x 12’-0” high Equipped with 25” x 12” oval insulated vision lights. Alternate door (#17) is 14’-2” wide x 12’-1” high Full view sash, styles, and rails to be insulated with polyurethane insulation consisting of four panels across. 1 All doors must be 2 inches in depth. All doors must be Steel and Insulated and White in color. All doors must have Four (4) Insulated windows spread evenly across the third panel up from the bottom except #15. Door #15 must have twelve (12) full light windows. All tracks, springs, and molding shall be replaced with Rubber and Vinyl, and White in color to match Phase 1 doors. All electrical connections for the doors shall be disconnected and reconnected by the contractor. Any photo cells shall be disconnected and reconnected by the contractor. All debris, especially screws, nails, and other sharp objects must be picked up during & after the installation process. Contractor is responsible for removal of all existing doors, tracks, and springs. All work shall be properly lubricated, adjusted and tested. Contractors must work between the hours of 7:00 a.m.