Project Drawings

Description

1 2 3 4 5 6 Gannett Fleming, Inc. 1010 Adams Avenue Valley Forge • PA • 19403 t 610 • 650 • 8156 E www.gannettfleming.com READING FIRE DEPARTMENT, ENGINE 7 BID DOCUMENTS: 22 JULY 2022 GENERAL NOTES: 1. C 2. 3. 4. 5. Project Number: 066446.007 7/22/2022 6:59:37 PM Local File: BIM 360://066446-City_of_Reading/066446_007_MEP_Central_R21.rvt 6. B ALL CONTRACTORS SHALL BECOME FAMILIAR WITH THE EXISTING CONDITIONS AFFECTING THIS PROJECT AND COORDINATE WITH OTHER DISCIPLINES. 1. PENNSYLVANIA UNIFORM CONSTRUCTION CODE (2018 ICC) DEMOLITION NOTES: OWNER ENGINEER OF RECORD 1. THE CONTRACTORS SHALL OBTAIN ALL REQUIRED PERMITS AND TURN OFF ALL IMPACTED UTILITIES BEFORE STARTING WORK. 2. ALL DEMOLITION/REMOVAL WORK SHALL BE PERFORMED IN ACCORDANCE WITH APPLICABLE STANDARDS AND REGULATIONS. 3. DEMOLITION WORK SHALL BE SCHEDULED AND IMPLEMENTED WITH MINIMAL DISRUPTION TO ADJACENT OCCUPIED AREAS. CITY OF READING 899 MORGANTOWN ROAD READING, PA 19607 PHONE: 610-655-6502 EMAIL: DAVID.ANSPACH@READINGPA.GOV ATTN: DAVID ANSPACH, PROJECT ADMINISTRATOR 4. REMOVE ALL MATERIALS IN A SAFE WORKMANLIKE MANNER AND DISPOSE OF PER ALL APPLICABLE CODES & SAFETY REQUIREMENTS. GANNETT FLEMING, INC. 1010 ADAMS AVENUE VALLEY FORGE, PA 19403 PHONE: 610.650.8101 FAX: 610.650.8190 EMAIL: BWEISSER@GFNET.COM ATTN: BRIAN M. WEISSER, P.E. 5. CONSTRUCTION DEBRIS MUST BE REMOVED FROM OCCUPIED SPACES AT THE END OF EACH WORK SHIFT. • INTERNATIONAL EXISTING BUILDING CODE 2018 (IEBC 2018) • INTERNATIONAL FIRE CODE 2018 (IFC 2018) • INTERNATIONAL PLUMBING CODE (IPC 2018) • INTERNATIONAL MECHANICAL CODE (IMC 2018) • INTERNATIONAL FUEL GAS CODE (IFGC 2018) • INTERNATIONAL ENERGY CONSERVATION CODE (IECC 2018) • INTERNATIONAL WILDLAND-URBAN INTERFACE CODE (IWUIC 2018) ALL NEW EQUIPMENT SHALL BE TESTED IN ACCORDANCE WITH APPLICABLE CODES AND STANDARDS. LEAKS, IF ANY, SHALL BE REPAIRED AND THE PIPING SHALL BE RETESTED TO MEET THE REQUIREMENTS. • INTERNATIONAL PERFORMANCE CODE (ICCPC 2018) • INTERNATIONAL ACCESSIBLE AND USEABLE BUILDING AND FACILITIES CODE (a117.1,2017) ALL NEW EQUIPMENT IS SHOWN IN APPROXIMATE POSITION. THE CONTRACTOR SHALL FIELD VERIFY THE ROUTING AND TIE-INS OF NEW AND EXISTING PIPING. ALL NEW PIPING SHALL BE INSTALLED AND ADEQUATELY SUPPORTED IN ACCORDANCE WITH APPLICABLE CODES AND STANDARDS.