Florissant Golf Club Roof Replacement & Gutter System Upgrade

Description

General work description: The City of Florissant is soliciting sealed bids from qualified contractors for the removal and replacement of the existing roofing system and the installation of a new gutter system at the Florissant Golf Course Club House. Work shall include all labor, materials, equipment, and incidentals necessary to complete the project in accordance with these specifications.Contractor is responsible for inspecting roof prior to bidding to provide accurate measurements, pricing and scope of work to complete the job. SCOPE OF WORKA. Roofing ReplacementThe contractor shall:Remove and legally dispose of existing roofing materials and debris.Inspect wood decking and replace as needed (unit pricing to be provided).Re-nail loose decking where required.Install aluminum drip edge at all eaves and rake edges.Install ice and water shield at:Eaves (extending 24” past interior wall)ValleysRoof penetrations (vents, pipes, chimneys)Roof-to-wall transitionsInstall two (2) layers of #15 underlayment.Install new 1-1 1/2 & 1-4 lead pipe flashings.Install ridge vent system (approx. 138 LF).Install 3-8"roof vents: Color TBDInstall 40 LF roof-to-wall and step flashing as needed. Color TBDInstall 20LF step flashing. Color TBDDetach and reset satellite dish (if applicable).Install starter strip at all roof edges.Install architectural shingles (Owens Corning Duration or approved equal) with 6 nails per shingle.Seal all flashing and penetrations with quad sealantPaint pipe flashings to match roof color.Perform full site cleanup including magnetic nail sweep, gutter clean, and drivewayB. Additional Roofing Components