Exhibit U – Structural Analysis for UMBC 20×60 Grid

Description

7/25/2018 Tim Moran Tomcat USA 5427 N. National Drive Knoxville, TN 37914 Structural Analysis for UMBC 20x60 Grid Baltimore, Maryland CRE Project # 18.411.18 We have completed our analysis for the above referenced project for conformance to the structural provisions of the 2015 International Building Code. The enclosed calculations are a representation of our analysis and results. The engineering seal on this cover letter shall apply to all calculations contained herein. Table of Contents for Analysis Package Cover Letter ............................................................................... 1 General Notes ............................................................................ 2 Reference Drawing(s) ................................................................. 3 Calculations ............................................................................. 4-6 The truss grid has been reviewed according to client design specifications and loads. Design loads are based on the code required forces for a permanent structure. Clark Reder Engineering Inc. should be consulted for applied loads in excess of those stated within the submittal. Regards, Clark Reder Engineering Inc. 07/25/2018 Certification. I fiProfessional Professional Certification: I hereby certify that these documents were prepared or approved by me, and that I am a duly licensed professional engineer under the laws of the State of Maryland, License # 38421, Expiration Date: 01/29/2020 We trust this information is suitable for your needs at this time. If you have any questions, please do not hesitate to contact our office. Jeffrey M. Reder, P.E. MD Registration #: 38421 07/25/2018 Eric D. Schultz, P.E. Clark Reder Engineering, Inc. ● 10091 Mosteller Lane, West Chester, OH 45069-3873 ● Phone (513) 851-1223 ● Fax (513) 217-9388 ● www.clarkreder.com Page 1 of 6 Project Name: UMBC 20x60 Grid CRE Project No: 18.411.18 7/24/2018 Page 1 GENERAL STRUCTURAL NOTES CODES AND REFERENCE 1. 2015 INTERNATIONAL BUILDING CODE 2. ASCE 7-10 MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES 3. ASCE 37-14 DESIGN LOADS ON STRUCTURES UNDER CONSTRUCTION 4. ANSI E1.2-2012 ENTERTAINMENT TECHNOLOGY, “DESIGN, MANUFACTURE AND USE OF ALUMINUM TRUSSES AND TOWERS” 5. ALUMINUM DESIGN MANUAL, 2015 EDITION DESIGN LOADS 1. DEAD LOAD: SELFWEIGHT OF STRUCTURE 2. RIGGING LOADS: SEE ALLOWABLE LOADING CRITERIA ON REFERENCE DRAWING A.