Dimensional Letter Signage

Description

Troup County Fire Station 14 SECTION 101419 - DIMENSIONAL LETTER SIGNAGE PART 1 - GENERAL 1.1 A. SUMMARY Section Includes: 1. Dimensional characters. a. 1.2 Fabricated channel dimensional characters. ACTION SUBMITTALS A. Product Data: For each type of product. B. Shop Drawings: For signs. 1. 2. 3. 4. 5. C. Samples for Initial Selection: For each type of sign assembly, exposed component, and exposed finish. 1. D. 1.3 A. 1.4 A. Include fabrication and installation details and attachments to other work. Show sign mounting heights, locations of supplementary supports to be provided by other installers, and accessories. Show message list, typestyles, graphic elements, and layout for each sign at least half size. Show locations of electrical service connections. Include diagrams for power, signal, and control wiring. Include representative Samples of available typestyles and graphic symbols. Product Schedule: For dimensional letter signs. Use same designations indicated on Drawings or specified. FIELD CONDITIONS Field Measurements: Verify locations of electrical service embedded in permanent construction by other installers by field measurements before fabrication, and indicate measurements on Shop Drawings. WARRANTY Special Warranty: Manufacturer agrees to repair or replace components of signs that fail in materials or workmanship within specified warranty period. 1. Failures include, but are not limited to, the following: DIMENSIONAL LETTER SIGNAGE 101419 - 1 Troup County Fire Station 14 a. b. 2. Deterioration of finishes beyond normal weathering. Separation or delamination of sheet materials and components. Warranty Period: Five years from date of Substantial Completion. PART 2 - PRODUCTS 2.1 A. DIMENSIONAL CHARACTERS Fabricated Channel Characters: Metal face and side returns, formed free from warp and distortion; with uniform faces, sharp corners, and precisely formed lines and profiles; internally braced for stability, to meet structural performance loading without oil-canning or other surface deformation, and for securing fasteners; and as follows. 1. Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following: a. b. c. d. 2. 3. 4. 5. 6. Character Material: Sheet or plate stainless steel. Material Thickness: Manufacturer's standard for size and design of character.