BID – Replace Barge Fleet Mooring Piles

Description

Alabama Port Authority Requisition and Proposal Project Name Replace Barge Fleet Mooring Piles Project No. 11751 Task No. 1 To: Prospective Bidders Delivery of Proposal: Alabama Port Authority (APA) See BID PROCEDURE below. Date: February 2026 Delivery of Performance of Work: Alabama Port Authority, McDuffie Terminal 1901 Ezra Trice Blvd, Mobile, AL 36603 Description of Work This Requisition solicits proposals to remove existing damaged barge mooring dolphin piles and install new mooring dolphin piles in the coal barge fleet mooring area of Garrows Bend as specified in the attached drawings and scope of work. All work shall be in accordance with the requirements stated herein, Scope of Work Specifications, Drawings and Reference documents, Insurance Requirements and applicable State of Alabama and Federal Laws. The project site is the barge mooring area in Garrows Bend, near the Alabama Port Authority’s McDuffie Terminal in Mobile, AL. The work consists principally of providing bonds, labor, materials, equipment, insurance, and supervision necessary to remove damaged barge mooring dolphin piles, furnish and install new mooring dolphin piles, and dispose of all removed materials associated with the work. The project includes but is not limited to: removing existing damaged dolphin piles at locations shown on the Plans, furnishing and installing new 42” dolphin piles with mooring bit per the attached drawings, and disposal of all removed piles. All materials, labor, tools, rigging and equipment necessary to perform the work shall be included by the Contractor in the proposal. It is the Contractor’s responsibility to field verify all dimensions and site conditions essential for the successful completion of the work. The Contractor shall not be entitled to any additional compensation for any work or expense resulting from the neglect of verifying all existing site conditions. All Contractors submitting bids are to carefully examine the site of the proposed work and thoroughly review the contract requirements prior to submission of a bid proposal. Each Bidder shall satisfy oneself as to the character, quality, and quantities of work to be performed, and as to the requirements of the proposed contract. The submission of a proposal shall be proof that the bidding Contractor has made such examination and is satisfied as to the conditions to be encountered in performing the work and as to the requirements of the proposed Contract.