ADDENDUM NO. 2 - Issued 4/14/25

Description

EL MONTE UNION HIGH SCHOOL DISTRICT Purchasing Department 3537 JOHNSON AVENUE, EL MONTE, CA 91731 Phone: (626) 444-9005 Email: purchasing@emuhsd.org April 14, 2025 TO FROM BID # PROJECT SUBJECT : : : : : All Bidders El Monte Union High School District 2024-25 (B7) Arroyo High School Kitchen Epoxy Floor Project Addendum No. 2 The following changes, omissions, and/or additions to the Project Manual and/or Drawings shall apply to proposals made for and to the execution of the various parts of the work affected thereby, and all other conditions shall remain the same. Careful note of the Addendum shall be taken by all parties of interest so that the proper allowances may be made in strict accordance with the Addendum, and that all trades shall be fully advised in the performance of the work which will be required of them. Bidder shall acknowledge receipt of this Addendum in the space provided on the Bid Form. Failure to do so may subject Bidder to disqualification. In case of conflict between Drawings, Project Manual, and this Addendum, this Addendum shall govern. CLARIFICATIONS RFI #1: Can you please clarify the epoxy flooring system. Answer: Flooring System: The specified epoxy flooring system is manufactured by Tnemec. It is a resinous flooring system— please see the attached specification for additional details. RFI #2: Can you please clarify the manufacture name or product number of the (3) new metal doors. Anything that helps us identify which type of doors are being requested. Answer: Metal Doors: The specified manufacturer for the new metal doors is Steelcraft or an approved equal. Doors must meet commercial requirements suitable for school applications. Also, attached is the Asbestos testing results which came up negative. END OF ADDENDUM NO. 2 EL MONTE UNION HIGH SCHOOL DISTRICT Bid No. 2024-25 (B7) Addendum No. 2 Page 1 of 1 SECTION 096723 RESINOUS FLOORING PART 1 - GENERAL 1.1 SUMMARY A. Section includes the surface preparation and application requirements of high performance resinous floor coating systems by a qualified applicator. B. Coordination: 1. 2. 3. 4. C. Related Sections: 1. 2. 3. 4. 5. 1.2 Coordinate surface preparation of substrates to avoid later difficulty or delay in performing the Work of this Section. Review installation procedures under other Sections and coordinate the installation of items that must be installed prior to application of the resinous floor coating systems.