001 Addendum 2

Description

ADDENDUM #2 RFQ 24-001 Bowden Street Tank Painting and Inspection This addendum is being issued to address questions submitted on RFQ 24-001 Q1. Can you please provide a comprehensive listing of the Scope of Work we would be bidding? A1. Interior Full Blast Surface Preparation – Abrasive blast to a SSPC-SP10 Near White Metal Blast standard. Prior to coating the substrate must be clean, dry and free of all contaminants. 1st Coat – Tnemec Series 91/94 or equivalent applied at 2.5-3.5 mils dry Stripe Coat - Tnemec Series N140-15BL or equivalent applied at 2-3 mils dry 2nd Coat – Tnemec Series 21-WH16 or equivalent applied at 10-12 mils dry Total Dry Film Thickness – 10.5-15.5 mils dry Exterior Full Blast Surface Preparation – Abrasive blast to a SSPC-SP6 Commercial Blast standard. Prior to coating the substrate must be clean, dry and free of all contaminants. 1st Coat – Tnemec Series 91/94 or equivalent applied at 2-3 mils dry 2nd Coat – Tnemec Series N69 or equivalent applied at 2-3 mils dry 3rd Coat – Tnemec Series 1094 or equivalent applied at 2-3 mils dry Total Dry Film Thickness – 6-9 mils dry Exterior Overcoat System Surface Preparation – High Pressure Water Blast at a minimum 3,000 psi. Power tool clean (SSPC-SP3) all visible rusty areas. Feather all edges. Prior to coating the substrate must be clean, dry and free of all contaminants. Spot Prime (visible rusty areas) – Tnemec Series 135 or equivalent applied at 3 mils dry 1st Coat – Tnemec Series 135 or equivalent applied at 3 mils dry 2nd Coat – Tnemec Series 1094 or equivalent applied at 2-3 mils dry Total Minimum Dry Film Thickness – 5 mils dry This addendum should be signed and returned with your proposal. Failure to do so may result in the proposal being nonresponsive. Christy Case Finance Director City of Commerce Company Name __________________________________________________________ Authorized Representative _________________________________________________ Page 1 of 1